Damp in the home is best summed up as water or moisture getting in where it should not be.!

Moulds will grow when provided with moisture and nutrients. High moisture levels can be the result of water coming in from the outside, through the floor, walls or roof; or from plumbing leaks; or moisture produced by the people living in the home, daily activities like bathing, washing clothes or cooking.

Anti-Mould Silicone

Description: Anti-Mould Silicone is a premium grade silicone sealant containing powerful anti-fungal compounds to prevent mould, mildew & bacterial growth in areas subject to high humidity levels. It provides a permanently water tight flexible seal. Bonds to glass, metal, sanitary wear, ceramics, painted surfaces and most non-porous surfaces.

  • Mould, Mildew & Bacterial Proof Guarantee for 25 years
  • Waterproof with Excellent Tooling Abilities
  • High Adhesion & Elasticity
  • 100% Silicone & Conforms to ISO 11600 25HM
  • Non shrinking, non staining and non yellowing

 Application: Sealing around baths, showers, sinks, windows and all other sanitary ware in kitchens, bathrooms, wet rooms and all areas of high humidity, moisture and condensation.

 Instructions: Ensure all surfaces are clean, dry and free from dust, grease and all other contaminants. Cut the tip of the cartridge and attach nozzle. Cut the nozzle at an angle of 45° with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun, keeping an even pressure on the trigger and keeping the gun at a constant angle. Tool down immediately with a spatula or piece of wood wetted with a soap and water solution. Sealant will be touch dry in approximately 20-30 minutes and fully cured after 24 hours for a 3mm bead but dependent on temperature and conditions.

Health & Safety:
Contains DCOIT. May produce an allergic reaction. Safety data sheet available on request. Contains a biocide: DCOIT. May produce an allergic reaction.

Not suitable for aquaria, on marble/natural stone or as a mirror adhesive. Porous surfaces should be primed before application. Silicones generally adhere poorly to some plastics e.g. PE, PP and PET. Not suitable for use with bituminous or plasticizer-releasing surfaces.

Information given is for general guidance only. Refer to product data and safety data sheets for full instructions and precautions in use. *The 25 year guarantee is valid subject to correct application and regular cleaning of the silicone. Excessive deposits of soap and other contaminants can cause secondary mould growth.

Store between 5°C and 25°C in cool dry conditions. This cartridge will yield 12m for a 5mm bead. Shelf life: 18 month
MouldX Product
    MouldX Anti-Mould Silicone